Guides For Other Useful Programs - Daewoo DWF-5510 Instruction Manual

GUIDES FOR OTHER USEFUL PROGRAMS

For the partial process or the combinations, or for adding time of each process.
step 1. Press power switch.
step 2. Press program button until the indicaing lamps make the combinations you want.
If only spin lamp is turned on, that means you will operate your washer for spin only.
If rinse and spin lamp are turned on, that means you will operate your washer for rinse and spin.
If add lamp is turned on with other process lamps, that means the time of the corresponding
process will increase by 1~2 minutes, that is, if add is on with wash, rinse and spin, the time of each
process will increase by 1~2 minutes. (Wash: add 2 min., Rinse: add 1 min., Spin: add 1 min.)
step 3. Press water level selector as your decision.
step 4. Press Start/Hold to start.
! Pressing @ Selecting
the Power Water level
Switch
POWER
For the reservation of finishing time
! Set your program as the
above procedure,
remaining last step.
* Press the course selection button.
* Press the procedure selection button.
* But wool/suit course can not reservation.
ADD
WASH
HIGH
RINSE
MID
SPIN
LOW
@ Press reservation button until
the digital monitor displays the
finishing time you want.
# Selecting Course
Wash & Rinse
& Spin
Only Spin
Add & Wash
Add & Rinse
& Spin
Add & Spin
Add & Wash
& Rinse & Spin
Only Wash
Rinse & Spin
13
$ Pressing
the Start/
Hold Switch
ADD
WASH
RINSE
SPIN
ADD
WASH
RINSE
SPIN
ADD
WASH
RINSE
SPIN
ADD
WASH
START
RINSE
/ HOLD
SPIN
ADD
WASH
RINSE
SPIN
ADD
WASH
RINSE
SPIN
ADD
WASH
RINSE
SPIN
ADD
WASH
RINSE
SPIN
# Press Start/Hold to start.
START
/ HOLD
End of
Washing
It is
Informed
by buzzer.