Directions For Safe Use; How To Install - Daewoo DWF-5510 Instruction Manual

DIRECTIONS FOR SAFE USE

HOW TO INSTALL

Location
Place your washer on a level and solid floor,
considering the length of inlet hose, drain
hose and power supply cord.
Do not place or store your washer below 0°C(32°F) to avoid
any damage from freezing.
Do not place your washer where it may be splashed during
bathing.
Installation of the Under Base Cover (Option)
-DWF-5510/5511/6010/6011
å
Before installing your washer, remove the
pad from the bottom of the cabinet.
Then, separate under cover from rear side
of cabinet by unscrewing and insert it into
the base.
-DWF-5520/5521/6020/6021
å
After the packing box is opened, there is
a under-base cover at the top of
the washer.
SCREW
4
If washer is not level, it should be corrected
by the adjustable leg (provided optionally) in
the front-right side under the base and/or, a
thin block or brick.
NOTES:
The opening muse not be obstructed by carpeting when
the washing machine is installed on a carpeted floor.
After installing the washing machine, assemble
the under-base cover.
∫
Push the under-base cover into the end,
which decrease the noise made by this
washer.
∫
Push the under-base cover into the end,
which decrease the noise made by this
washer.