Table of Contents
Advertisement
Adjusting Screen Size
Adjusting
Screen Size
• You can adjust
screen size or
aspect ratio as
desired.
INPUT
POWER
SELECT
DISPLAY
ZOOM-
ZOOM+
MENU
VOL
VOL
PICTURE
SCREEN
MODE
MODE
FREEZE
SOUND
MUTE
SLEEP
MODE
22
1
Press the SCREEN MODE Button.
• Each time you press the SCREEN MODE button on the
Remote Control, a different SCREEN MODE appears. The
sequence used is as follows:
• The MENU shown below will display on the screen.
SCREEN
MODE
1) Component 1 select and DVD Input.
16:9
Enlarge LBS
2) Component 1 select and DTV Input.
16:9
3) PC select.
H. Size
NOTES:
When the INPUT SIGNAL is DTV [COMPONENT 1 ], only the
aspect ratios of 16:9 and 4:3(Normal) will be applied by Input
signal.
Etc) If input signal is 16:9, PDP displays in 16:9 mode.
The digital broadcasting (720p, 1080i) is fixed at the aspect
ratio of 16:9.
Displaying a picture in a normal mode (4:3) for a long time
may cause phosphor of the PDP to be burned. So avoid
displaying a picture in a normal mode for a long time.
16:9 : Theatre-like 16:9 picture formats
Panorama
Normal
Enlarge LB : Enlarges the screen as to fill the black part of
Enlarge LBS : Enlarges the screen, and shifts up as to see
Panorama
Normal
Enlarge LB
Normal
V. Size
: 16:9 picture formats with panorama effect
: Displays pictures of normal size (i.e., a 4:3
aspect ratio)
up and down, top and bottom of the picture.
the subtitles in case you are watching video
with subtitles.
Advertisement
Table of Contents
