One Touch Copy - Vhs To Dvd; Copy Edit (Vcr ➝ Dvd) - Daewoo DF-8150P User Manual

One Touch Copy - VHS to DVD

You can copy the contents of a VHS tape to a DVD+R or DVD+RW using the [COPY] button. This allows you to
archive your old VHS tapes to DVD.
If the VHS videotape you are attempting to copy is copy-protected, you will not be able to copy the tape. It is not
permitted to copy Macrovision encoded tapes.
1
Insert a VHS Tape.
Insert the VHS videotape you wish to copy into the VCR deck.
2
Insert a DVD+R or DVD+RW disc.
Insert a blank DVD+R or DVD+RW disc in the DVD deck and close the disc tray.
• When using a DVD+RW disc, you must initialize before copying; see page 50.
3
Find the place on the VHS tape from which you want to start recording using the [PLAY/PAUSE], [FF] and [REW]
functions. And press [STOP].
4
Press [COPY] on the remote control.
5
➝
Select (VCR DVD) and press [ENTER] or [COPY].
6
Press [REC SPEED] or [.../†] to select the desired
Record Mode in 'Copy to Disc' menu:
• HQ (High Quality - 1 hr/disc)
• SP (Standard Play - 2 hrs/disc)
• EP (Extended Play - 4 hrs/disc)
• SLP (Super Long Play - 6 hrs/disc)
7
Press [COPY] again to start copying.
8
Stop the Copy Process
To stop copying at any time, press [STOP].
Copying will stop automatically when the VHS tape ends.
Copy Edit (VCR ➝ DVD)
During one touch copy you can search and resume copy.
1
Press [PLAY/PAUSE] to enter COPY EDIT mode.
2
Press [PLAY/PAUSE] again to playback.
3
Search with [FF/REW] button.
4
Press [COPY] to resume copy.
46
Quick-Copy Menu
Please select the copy option:
DVD -> VCR
VCR -> DVD
Instructions
Enter-Confirm Move ...†
Copy to Disc
Updating the disc. This may take a few
minutes. Please wait...
Instructions
Basic Recording
Copy to Disc
Choose quality then
press COPY:
HQ
SP
EP
SLP
DVD Status
I Stop
0 : 00 : 10
Setup-Exit