Interaction With Tapedeck Pre; Recording Overdubs - Native Instruments Guitar Rig 5 Application Reference

sound, e.g. for using it "outside of" GUITAR RIG 5. Files you import and play back will
not be processed, which makes Tapedeck Post ideal for playing drum loops and your own
backing tracks.
Its controls are similar to Tapedeck Pre, except that it has no Transpose (TRANSP),
TEMPO controls, nor can you choose between playing at Input or at Output.
5.2.1

Interaction with Tapedeck Pre

Tapedeck Post is linked with Tapedeck Pre to allow for synchronization and easy transferal
of recordings.
▪ When SYNC DECKS is turned on, the Tapedeck Post starts and stops simultaneously with
the Tapedeck Pre. This is useful when processing samples with GUITAR RIG, as their
timing is kept intact.
▪ You can easily transfer a recording from Tapedeck Post to Tapedeck Pre by clicking
on the TRANSFER button.
5.2.2

Recording Overdubs

1. As Tapedeck Pre can play its file at the end of the signal chain, but before Tapedeck
Post, you can easily record sketches on multiple tracks using overdubbing. Make sure
both tapedecks are visible by clicking on the buttons in the Toolbar.
2. Record a track in Tapedeck Post, as explained above. Send it to
ing on the TRANSFER
overdub.
3. Select PLAY AT OUTPUT
4. Turn on SYNC DECKS
5. On Tapedeck Post, click on the
button to record your second track as an overdub.
6. If you want to overdub again, click on the
procedure.
7. After overdubbing as many takes as you want, you can save your work as described
above.
button. Alternatively, load a file in
on Tapedeck Pre.
on Tapedeck Post.
New button to create an empty track. Click the
Tapedeck Pre
Tapedeck Pre
TRANSFER button and repeat the described
GUITAR RIG 5 - Application Reference - 43
The Rack Tools
Tapedeck Post
TUNE or
by click-
that you want to
Play