Automating Parameters In Apple Logic Pro - Native Instruments Guitar Rig 5 Application Reference

Hide thumbs

Table Of Contents

Table of Contents

▪ The first 256 slots are reserved for component parameters of the main rack.

▪ Slots 257-383 are statically assigned and reserved to Rack Tools and Framework Pa-

rameters (such as Preset Volume).

▪ Slots beyond 384 are dynamically assigned to component parameters used in the

Master FX section.

Deleting a module from the rack results in clearing of the slots it had occupied before.

When you add a new one, it tries to fit its parameters into the empty spaces within the

current Automation List. Only if this is not possible, entries will be appended at the end of

the list.

Enabling Automation for Rack Tools

The Rack Tools (Metronome, Tapedecks, etc.) are by default set to automation with static

automation IDs. However, there is an option to switch any Rack Tool back to dynamically

assigned automation IDs, in order to maintain backwards compatibility.

To switch between the automation modes:

Right-click a Rack Tool and select

(whichever mode you'd like to activate).

IDs

Rebuilding the Automation List

After you have added and removed numerous components, your Automation List can be a

bit of a mess. If you want to fill up all the empty spaces, right click any component of your

Rack (while in plug-in mode) and select

Mind that all your previously recorded automation might be assigned to a wrong compo-

nent now, as a result of their changing positions in the Automation List.

7.2.2