Remote Control - Daewoo DPP-4270NHS User Manual

Remote Control

The number in (
*
the function of each button is explained in detail.
TV/VCR/DVD/SAT/CATV
19 Channel number (0~9)
Use to select channel directly 0~9
Indicates the current state and resolution.
Use this function to make video input selection.
It changes in the following sequence
TV -> AV1 -> AV2 -> AV3
48
Used to zoom the screen. To enlarge, press the(+)
button, and to return to the previous condition, press
the(-) button.(Zoom Mode : Zoom 0~20)
18
Used to display a desired menu.
Previous Program button
It returns to previous channel.
Picture Mode button
41
Whenever pressing the button, it cycles
Normal -> User -> Cinema -> Dynamic
Sound Mode button
51
Whenever pressing the button, it cycles
modes: Normal -> Movie -> Music -> News -> User
When Using Remote Control:
•
Be sure not to allow the Remote Control to drop or to become wet.
•
Keep it away from hot or moist locations.
12
) indicates the page in which
RECALL
56
54
ZOOM button
Menu button
Mute button
Mute sound.
following order.
following order.
Note
• Use two "AAA" batteries.
• Be sure to use replacement batteries of the
same type as the original ones.
• The life of a battery depends on how much
it has been used.
Power button
Pressing the Power button of the TV allows
the Display to be be in standby. (A red light is
shown in the Remote Control Sensor.) At this
time, if you press the Power button of the
Remote Control, the Display is turned ON
(And shows a green light in the Sensor).
50
Still
Used to view a still picture whilst watching
moving images.(Sound can be heard.)
Multimedia
Use this function to make video input selections.
It changes in the following sequence PC -> DVI -
> Component 1-> Component 2 -> PC
PR button
Volume button / Adjusts the volume.
Screen Size button
Adjusts the size of the screen
(Normal, 16:9, etc.)
Sleep Timer
Each time you press this button, a different input mode
appears. The sequence is as follows: 15Min. -> 30Min. -
> 60Min. -> 90Min. -> 120Min. -> OFF
After the time is selected, the TV automatically goes into
a stand-by state.
Teletext Function
l - ll
- Selects the language during dual language
broadcast.
- Selects mono sound during stereo broadcast.
VIDEO/DVD Function
Installing the Batteries in your Remote Control:
•
Push to open the cover of the remote controller
•
Put the batteries in the battery cell after checking the
Polarities, and then shut the cover.
17
54
/ Adjusts the channel.
44
67
68