Connecting Dolby Digital Amp With Digital Audio Out Jack; 2Nd Scart Socket - Daewoo DX-9810 Instruction Manual

Dvd player + video cassette recorder
Hide thumbs Also See for DX-9810:
Table of Contents

Advertisement

Connecting Dolby Digital Amp with
Digital Audio Out Jack
How to connect
REAR PANEL OF DVD-VIDEO
Home Theater Receiver with Dolby Digital decoding capability
1
1
Select either COAXIAL or OPTICAL to connect to amp of Dolby Digital.
** If you want to know about "Dolby Digital", please refer to [About DVD] in 55-57p.
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
"DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
16
CONNECTING CABLE
(Not supplied)
(L) AUDIO IN (R)

2nd scart socket

2nd scart socket
If your video has the AV2 output, shown in the diagram below, you can connect other equipment as seen on
pages 13-16.
2nd scart
INPUT+OUTPUT
When connecting other equipment please refer to their manuals for further information. This video manual
recommends the set up as shown on page 13. When connected by this method if the equipment is turned off the
video behaves as normal, but if the equipment is turned on the video will automatically switch over to AV2
mode and displays the channel of the other equipment, channel selection can only be performed by the other
equipment, the video PR+/PR- buttons have no effect.
To return to normal video use the other equipment must be turned off.
Recording from other Equipment.
Simple recording can be performed, ensure the equipment is turned on and is displaying the correct channel.
Timer recording, set the video to perform a timed recording ensuring AV1 is selected as the channel to be
recorded. Some equipment may have a timer which allows it to be powered on to the correct channel, if this
feature is not available the other equipment should be left powered on.
Front AV
If the video has front input sockets, it is possible to connect devices such as a
camcorder to the video. To watch a camcorder tape the video must be in
AVF mode. Recordings of this input are the same as described on page 15.
INPUT ONLY
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents