Quick Start Guide - Canon EOS Rebel Ti SERIES Instructions Manual

Quick Start Guide

1 Install the batteries.
Insert two CR2 lithium bat-
teries as shown by the bat-
tery orientation diagram on
the battery compartment
cover. (→page 14)
5 Load the film.
Align the edge of the film
with the <
close the back cover until it
snaps shut. (→page 18)
• The film will then advance
to the first frame
automatically.
6
> mark, and
2 Attach a lens.
Align the red dots on the
lens and camera and turn
the lens as shown by the
arrow until it snaps into
place. (→page 16)
6 Focus the subject.
Aim the AF point on the
subject and press the shut-
ter button halfway to auto-
focus. (→page 22)
• Under low-light or backlit
conditions, the built-in flash
will pop-up and fire
automatically. (→page 49)