Selecting An Af Point - Canon EOS Rebel Ti SERIES Instructions Manual

Selecting an AF point

The AF point is used for focusing. The AF point can be selected auto-
matically by the camera or manually by you. In the Basic Zone modes
and < > mode, the AF point selection is automatic only. In the <
< >, < >, and <
automatically or manually.
Automatic AF point Selection
The camera selects the AF point automatically according to situation.
Manual AF point Selection
You can select any of the seven AF points manually. This is best when you
want to be sure to focus on a particular subject, or to use the time of the
AF function to help you compose a particular shot quickly.
Automatic AF
Point Selection
32
> modes, the AF point can be selected either
1
Press the <
The current AF point will light.
2 Select the desired AF point.
•
While looking at the AF points on the
LCD panel or in the viewfinder, turn
the <
AF point. The selected AF point will
flash in the viewfinder. The AF point
selection will change in the looping
sequence below.
•
After selecting the AF point, press
the shutter button halfway. The
camera will then be ready to take
pictures.
Manual AF
Point Selection
> button. (
> dial to select the desired
>,
)