Table of Contents
Advertisement
Quick Start Guide
Install the batteries.
Refer to the battery
orientation diagram on the
battery chamber cover,
and insert two CR123A
lithium batteries as
shown, (-♦page
18
)
Load the film.
Align the edge of the film
leader with the orange
mark on the camera and
close the camera back until
it snaps shut, (-♦page 23)
• The film will then
advance to the first
frame automatically.
Attach a lens.
Align the red dots on the
lens and camera and turn
the lens as shown by the
arrow until It snaps in
place, (-♦page
20
)
Focus the subject.
Aim the focusing points on
the main subject and press
the shutter button halfway
to autofocus. (-»page 22)
• Under low-light or backlit
conditions, the built-in
flash will pop-up and fire
automatically, (-♦page 74)
8
Advertisement
Table of Contents
