Silencing the Beeper
The beeper can be silenced in all of the shooting modes.
LCD Panel Illumination
Using the Remote Switch
1
Move the <
icon.
•
Look at the LCD panel and press the
<
> button. (
2
Set the setting to " ".
•
Turn the <
•
To enable the beeper to sound, set to
" ".
Illuminating the LCD panel.
•
Press the <
•
To turn off the illumination, press the
<
> button again or press the
shutter button halfway.
•
While the LCD panel is illuminated,
pressing any buttons (except the
shutter button) or turning any dials
will extend the illumination time.
Connect the (optional) Remote Switch
RS-60E3's plug to the camera's
remote control terminal. Press the
release button to take the picture.
> arrow to the <
)
> dial.
> button. (
)
>
51