Table of Contents
Advertisement
Setting Oven Lockout Feature
The
pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and
prevents the warmer drawer and ESEC Control from being turned on. It does not disable the clock, Kitchen Timer, Warmer
Zone or the interior oven lights.
INSTRUCTIONS
To activate the Oven Lockout feature:
1. Press and hold
for three seconds (Fig. 1).
2. After 3 seconds the lock icon light (
sound and "DOOR LOCKED" will flash in the display. Once the
oven door is locked the "DOOR LOCKED" indicator will stop
flashing and remain on along with the lock icon light.
To reactivate normal oven operation:
1. Press and hold
for three seconds. A beep will sound. The
"DOOR LOCKED" will continue to flash until the oven door has
completely unlocked and the lock icon light (
(See Fig. 2).
2. The range is again fully operational.
Setting Temperature Display — Fahrenheit or Celsius
The BROIL
and CLEAN
temperature display modes. The oven control can be programmed to display
temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to
display in Fahrenheit.
INSTRUCTIONS
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit:
1. To tell if the display is set for Fahrenheit or Celsius press and
hold the
pad. "BROIL", "550°" will appear in the display
(See Fig. 3) and continue to HOLD for 7 seconds. A beep will
then sound. If "F" appears, the display is set to show
temperatures in Fahrenheit (Fig. 4). If "C" appears, the display
is set to show temperatures in Celsius (Fig. 5).
2. Press
to switch between Fahrenheit or Celsius display
modes. The display will show either "F" (Fig. 4) or "C" (Fig. 5).
3. Press
to accept the change or press
change.
Setting Oven Controls
) will appear, a beep will
) will clear
pads control the Fahrenheit or Celsius
to reject the
PRESS
for 3 seconds
for 3 seconds
PRESS
for 7seconds
or
18
DISPLAY
Figure 1
Figure 2
DISPLAY
Figure 3
Figure 4
Figure 5
Advertisement
Table of Contents
