Table of Contents
Advertisement
- If touch control
automatically lights at medium flame level
(three flame level indicators illuminate).
4. To adjust the burner flame level, use the
Increasing
Control.
The residual heat indicator
immediately after the burner is lit.
This means that the cooking zone is getting
hot: the indicator remains on until the pan
support and the burner have cooled down.
How to turn off a
1. To turn off a burner press the relevant Burner
Ignition Touch Control
level indicators go off.
The residual heat indicator remains on until
the pan support and the burner have cooled
down.
In case of ignition
The hob ignition device generates a series of
small sparks for about 6 seconds.
If the flame does not light during this period,
the gas flow to the burner is interrupted. After
3 seconds, the ignition device automatically
repeats the ignition procedure for another 6
seconds.
After three failed ignition attempts, a safety
device is set on the burner. The flame level
indicators flash.
Caution! When the safety device is set
on a burner, the burner controls cannot
be operated for about 60 seconds.
is selected, the burner
or Decreasing
lights up
burner
. All the flame
failure
Touch
9
Hide quick links:
Advertisement
Table of Contents
