Control Knobs; Operation; Ignition Of The Burner - AEG 69503G-M User Manual

Control knobs

OPERATION

Ignition of the burner

WARNING!
Be very careful when you use open fire in kitchen environment. Manufacturer decline any
responsibility in case misuse of the flame
Always light the burner before you put cookware.
To light the burner:
1. Turn the control knob counterclockwise to the maximum position (
down.
2. Keep the control knob pushed for approximately 5 seconds; this will let thermocouple
to warm up. If not, the gas supply will be interrupted.
3. Adjust the flame after it is regular.
If after some tries the burner does not light, check if the crown and its cap are in correct
positions.
1 Burner cap
2 Burner crown
3 Ignition candle
4 Thermocouple
Symbol Description
no gas supply / off position
ignition position / maximum gas supply
minimum gas supply
1
2
3
4
25
Operation
) and push it