Conversion To Lpg - AEG 79902 Operating Instructions Manual

Conversion to LPG

Replacing the injectors
1. Remove the pan supports.
2. Remove the burner caps and crowns.
3. Using a 7 mm socket spanner
remove the injectors,
with the ones required for the new type
of gas
(see the table "Burner
characteristics").
Reassemble the parts, following the
4.
same procedure backwards.
5. Replace the Gas Type Label (located near
the gas supply connection) with the one
corresponding to the new type of gas. The
label is supplied in the accessories plastic
bag.
Should the feeding gas pressure be different or
variable compared with the required pressure,
an appropriate pressure regulator must be fitted
on the gas supply pipe, in compliance with the
rules in force.
Burner characteristics
GAS BURNER
TYPE TYPE
NATURAL
Rapid
GAS
Semirapid
( G 2 0 )
Auxiliary
LIQUID
Rapid
GAS
Semirapid
(Butane/
Auxiliary
Propane)
unscrew and
then replace them
INJECTOR NOMINAL
REFERENCE THERMAL
1/100 mm POWER
119
96
70
86
71
50
REDUCED
THERMAL
POWER
kW kW
2.9 0.65
1.9 0.45
1.0 0.33
2.7 0.65
1.9 0.45
1.0 0.33
NOMINAL FEEDING
FLOW RATE PRESSURE
m 3 /h
g/h mbar
0.276
0.181 -
0.095 -
- 196
- 138 28-30/37
- 73
20
33