Switching On The Dual Cooking Zone; Residual Heat Indicators - AEG 6010 K Operating Instructions Manual

Operating Instructions

Switching on the Dual Cooking Zone

The switch for the dual cooking zone is switched on by turning clock-
1
wise and must not be turned past the stop!
1. Turn the switch for the dual cooking zone clockwise.
0
Turn past position 9 through light resistance at the
symbol, to a clearly noticeable stop.
2. Then turn back to the required heat setting for
cooking.
3. To stop cooking, turn back to the off position.
The next time the dual cooking zone is required,
3
repeat the above procedure.

Residual Heat Indicators

An indicator is assigned to each cooking zone. This illumi-
nates when the temperature of the cooking zone reaches
80° C
Important! As long as the residual heat indicator is illu-
1
minated, there is a risk of burns.
Even when the cooking zone is switched off, the corresponding indica-
tor will remain on until the temperature falls below 80° C.
You can use the residual heat for melting and for keeping food warm.
2
30
3
2
4
1
5
0
6
9
8
7