Installing The Switch; Wall Mounting The Switch - NETGEAR FS2105 Installation Manual

Expanded Workgroup
Both the
Model FS2105 Fast Ethernet Switch
can be used to connect multiple PC workgroups.
Uplink
Model EN2005
10 Mbps Hub
Up-link 5 4 3 2

Installing the Switch

There are three ways to install either the Model FS2105 Fast Ethernet Switch or the Model
FS2108 Fast Ethernet Switch:
•
Desktop
• Magnetic mount (see
• Wall mount
You do not need tools for desktop or magnetic mount installation, but you do need a Phillips
screwdriver for wall mount installation.

Wall Mounting the Switch

1. Measure the distance between the mounting holes on the back of the
switch.
2. Mark the wall to match the location of the mounting holes.
3. At the marked location, insert the two screws that you received in your
package contents.
Note: For all three installations:
• Choose a location that is near the devices to be connected.
• Make sure you are close to an electrical outlet.
• Be sure to leave at least 2 inches of space all around the switch for
ventilation.
Model FS2105/FS2108 Fast Ethernet Switch Installation Guide
and the
Model FS2108 Switch
Uplink 8 7 6 5 4 3 2
Model DS108
10/100 Mbps Hub
7.5 1A
1 PWR
")
"Inserting the Magnet
Model FS2108 Fast Ethernet Switch
110V 3A MAX
1 PWR
Uplink
Auto 10/100 Mbps DUAL SPEED
9609FA