Download Print this page

Proper Location; Use Of Extension Cords; Assembly Instructions - NewAir AK-200 SERIES Owner's Manual

Kegerator
Hide thumbs

Advertisement

ASSEMBLY INSTRUCTIONS

Risk of child entrapment! Before throwing away your old appliance:
● Take off the doors.
● Leave the shelves or other accessories in place so that children
may not easily become trapped inside.
(Note: If the refrigerator has been placed in a horizontal or tilted position for any
period of time, please wait at least 24 hours before plugging the unit in.)

Proper Location

To ensure that your kegerator works to the maximum efficiency it was
Ÿ
designed for, keep it in a location where there is proper air circulation and
electrical outlets.
Choose a location where the kegerator will be away from heat and will not
Ÿ
be exposed to direct sunlight.
This kegerator is designed for indoor use only -- it should not be used
Ÿ
outdoors.
This kegerator is a freestanding design and should not be placed in a built-in
Ÿ
or recessed area.
Kegerator unit dimensions:
Ÿ
The following dimensions are recommended for clearances around the kegerator:
Ÿ

Use of Extension Cords

Always avoid using an extension cord because of potential safety hazards in
Ÿ
certain conditions. If it is necessary to use an extension cord, use only a 3-wire
extension cord that has a 3-blade grounding plug. And use the cord with No. 14
AWG minimum size and rated not less than 1875watts.
Assembly Instructions
Read assembly instructions carefully to ensure that you understand all installation
Ÿ
instructions before installing the kegerator. If after completing the process
SAVE THESE INSTRUCTIONS
For Future Use
DANGER!
21.3" W x 33.20" H (with casters) x 26.60" D
Sides ........................5" (12 cm)
Back ........................5" (12 cm)
5

Advertisement

loading