Scenes; Capture Images In A Sequence; You In The Picture-Self-Timer - Nokia N78 User Manual

Hide thumbs Also See for N78:
Table of Contents

Advertisement

Scenes

Scenes are only available in the main camera.
A scene helps you to find the right colour and lighting
settings for the current environment. The settings of each
scene have been set according to a certain style or
environment.
The default scene in the image mode is Auto, and in the
video mode
Automatic
To change the scene, in the active toolbar, select
modes
and a scene.
To make your own scene suitable for a certain
environment, scroll to
Options
> Change. In the user defined scene you can
adjust different lighting and colour settings. To copy the
settings of another scene, select
and the desired scene. To save the changes and return to
the scenes list, press Back. To activate your own scene,
scroll to
User
defined, press the scroll key, and select
Select.

Capture images in a sequence

The sequence mode is available only in the main camera.
To set the camera to capture images in sequence (if
enough memory is available), in the active toolbar, select
Sequence
mode.
© 2009 Nokia. All rights reserved.
(both indicated with
User
defined, and select
Based on scene mode
To start capturing images in a quick sequence,
selectBurst, and press and hold the capture key. The
device captures images until you release the key or until
the memory runs out. If you press the capture key briefly,
the device captures six image in a sequence.
To capture two or more images in defined intervals, select
the desired time interval. To capture the images, press
the capture key. To stop capturing images, select
).
Cancel. The number of images taken depends on the
available memory.
Scene
The captured images are shown in a grid on the display.
To view an image, press the scroll key. If you used a time
interval, only the last captured image is shown on the
display.
You can also use the sequence mode with the self-timer.
To return to the sequence mode viewfinder, press the
capture key.
To switch off the sequence mode, in the active toolbar,
select
Sequence mode
You in the picture—self-timer
The self-timer is available only in the main camera. Use
the self-timer to delay the capture so that you can include
yourself in the picture.
To set the self-timer delay, in the active toolbar, select
Self timer
Single
>
2
seconds,
10
seconds, or
>
shot.
20
seconds.
65

Advertisement

Table of Contents
loading

Table of Contents