Table of Contents
Advertisement
When the device is in the offline profile, you can still use
WLAN (if available). Remember to comply with any
applicable safety requirements when establishing and
using a WLAN connection.
Tip: To check the unique media access control (MAC)
address that identifies your device, enter
*#62209526# in the standby mode.
WLAN wizard
The WLAN wizard helps you to connect to a WLAN and
manage your WLAN connections.
The WLAN wizard shows the status of your WLAN
connections in the active standby mode. To view the
available options, scroll to the row showing the status,
and select it.
If the search finds WLANs, for example,
found
is displayed, to create an internet access point (IAP)
and start the web browser using this IAP, select the status
and
Start Web
browsing.
If you select a secured WLAN network, you are asked to
enter the relevant passcodes. To connect to a hidden
network, you must enter the correct network name
(service set identifier, SSID). To create a new access point
for a hidden WLAN, select
If you are connected to a WLAN, the IAP name is displayed.
To start the web browser using this IAP, select the status
98
WLAN network
New
WLAN.
and
Continue Web
browsing. To end the connection in
the WLAN, select the status and
If WLAN scanning is off and you are not connected to any
WLAN,
WLAN scanning off
on and search for available WLANs, select the status and
press the scroll key.
To start a search for available WLANs, select the status and
Search for
WLAN. To set WLAN scanning off, select the
status and select
WLAN scanning
To access the WLAN wizard application in the menu, press
, and select
Tools
>
WLAN internet access points
Press
, and select
Tools
Select
Options
and from the following:
Filter WLAN networks
●
of found networks. The selected networks are filtered
out the next time the application searches for WLANs.
Details
— View the details of a network shown in the
●
list. If you select an active connection, the connection
details are displayed.
Define access point
●
(IAP) in a WLAN.
Edit access point
— Edit the details of an existing IAP.
●
You can also use connection manager to create internet
access points.
See "Active data connections", p. 99.
Disconnect
WLAN.
is displayed. To set scanning
off.
WLAN
wiz..
WLAN wiz.
>
— Filter out WLANs in the list
— Create an internet access point
© 2009 Nokia. All rights reserved.
Advertisement
Table of Contents
