4. Lift up the Main Board as shown in Fig. 29 and put it aside.
Removing the MDC Modem
To remove the MDC Modem, first remove the Main Board (see
then perform the following steps:
1. Disconnect the MDC cable and remove the two screws retaining the MDC modem
as shown in Fig. 30
2. Lift up the MDC modem and put it aside.
Fig. 29 Lifting up carefully the main board
Fig. 30 The MDC Modem
Packard Bell EasyNote C3 Disassembly Manual
Removing the Main
Board)
M2x4 silver
19