Interrupt Mode; Energy Saver (Power Saver Mode, Sleep/Shutdown Mode); Job Memory - Panasonic DP-8016P Operating Instructions Manual

Making Copies
Other Features

■ Interrupt Mode

This mode interrupts the
current running copy job and
allows other copy jobs to be
processed.

■ Energy Saver (Power Saver Mode, Sleep/Shutdown Mode)

These modes save power while the machine is not in use.
Power Saver Mode
To enter
Sleep/Shutdown Mode
Automatically enters the Sleep/
Shutdown Mode after 10 minutes
from the last job. ∗
NOTE
∗
To adjust the default Sleep/
Shutdown Mode timer, see
page 54.

■ Job Memory

Two Copy Jobs can be stored in Memory
(M1 to M2) for recall at a later time.
Set up the copy
job to be stored.
(See pages 24-43)
● JOB MEMORY mode will not be deleted even if the power switch is turned Off.
NOTE
● When using the manual skyshot mode, the M1 and/or M2 are turned On and other job requiring
48
1
Automatically enters
the Power Saver
Mode after 10
or
minutes from
the last job. ∗
To store a job in memory
1
memory cannot be used.
Other Job
2
For ADF
For i-ADF
(See pages 24-43)
Flashes :
Power Saver
Mode
Lights :
Sleep/Shutdown
Mode
or
To exit
or Any Key
To exit
2
or