Other Features
Energy Saver/Interrupt Mode
NOTE
24
INTERRUPT (F1) Key
ENERGY SAVER
INTERRUPT
∗
Energy saver time (15 minutes) and Sleep time (30 minutes) can be changed by the
key operator. (See page 31)
Modes
Normal Operation
Energy Saver Mode
Sleep Mode
ENERGY-SAVER Key
I
These modes can save power while the copier is not
in use.
Energy Saver Mode
# To enter this mode
Press the ENERGY-SAVER key or the copier will
automatically enter the ENERGY-SAVER Mode after
*
15 minutes
from the last copy. The indicator will flash.
$ To cancel this mode and make copies
Press the ENERGY-SAVER key again.
Sleep Mode
# Automatically enters the Sleep Mode after 30
minutes from the last copy. The copier power will
drop and the indicator will light.
$ To make copies, press the ENERGY-SAVER key.
Interrupt Mode
C This mode can interrupt other copy jobs while
making copies.
# Press the INTERRUPT (F1) key, the indicator will
light.
$ Make another copy job using the platen glass.
% Press the INTERRUPT (F1) key again to continue
the original job.
Note: The ADF/i-ADF can not be used with interrupt.
(Use only the Platen)
Power Consumption
Approximately 90 Wh
Approximately 38 Wh
Approximately 2.2 Wh
Warm Up Time
N/A
17 sec. recovery
30 sec. recovery