Change, Rx, Demod' Menu; Change, Rx, Demod', If Frequency Menu; Change, Rx, Demod', Modulation Menu; Change, Rx, Demod' Fec Menu - Paradise Datacom P300 Series Installation & Operating Handbook

6.7.7

Change, Rx, DEMOD' Menu

The options available on this menu change if the Rx=Tx function (on the Change, Rx Menu) is active.
Tx=Rx Not active
Rx=Tx Active
If the Rx=Tx function is active, only those parameters which vary between Rx & Tx are displayed, the screen
appears as follows:
Each of this is now discussed in turn, referring back to the Tx path screens where operation is identical.
6.7.8

Change, Rx, Demod', IF FREQUENCY Menu

See Change, Tx/Rx, Modulator, IF Frequency Menu on page 65
6.7.9

Change, Rx, Demod', MODULATION Menu

See Change, Tx/Rx, Modulator, Modulation Menu on page 65

6.7.10 Change, Rx, Demod' FEC Menu

See Change, Tx/Rx, Modulator, FEC Menu on page 66

6.7.11 Change, Rx, Demod' REED-SOLOMON Menu

See Change, Tx/Rx, Modulator, RS Menu on page 68

6.7.12 Change, Rx, Demod' SCRAMBLER Menu

See Change, Tx/Rx, Modulator, Scrambler Menu on page 69

6.7.13 Change, Rx, Demod' SPECTRUM INVERT Menu

See Change, Tx/Rx, Modulator, Spectrum Invert Menu on page 72
P300H
Demod: 1:Freq 2:Mod'n 3:FEC
4:RS 5:Scr 6:Spect Inv 7:Sweep 8:AUPC
Change, Rx, Demod Menu (Rx=Tx not active)
Demod: 1:Freq 2:Sweep 3:AUPC
(most of Rx follows Tx as Rx=Tx active)
Change, Rx, Demod Menu (Rx=Tx Active)
P300 Series Modem Installation and Operating Handbook Page 93