Paradise Datacom P300 Series Installation & Operating Handbook page 199

Cat' Message First Direction
Mnemonic Avail'
4 RxCalcQry to unit
V1.49*
4 RxCalcRd V1.49* from unit
4 TxCalcQry V1.49* to unit
4 TxCalcRd V1.49* from unit
5 GoLocal V1.37 to unit
5 ContModeQry V1.37 to Unit
5 ContModeRd V1.37 from unit
5 ContModeWr V1.37 to unit
6 ShortDeviceQry V1.49 to unit
6 ShortDeviceRd V1.37 from unit
6 UnitInfoQry V0.61 to unit
6 UnitInfoRd V0.61 from unit
7 SAFChgWr to unit
V1.76*
7 SAFStatQry V1.49* to unit
7 SAFStatRd V1.49* from unit
8 ActionWr V1.18 to unit
9 TxPwrQry V0.61 to unit
9 TxPwrRd V0.61 from unit
9 TxPwrWr V0.61 to unit
10 Log16EventQry V0.71* to unit
10 Log16EventRd V0.71* from unit
10 Log4EventQry V0.71 to unit
10 Log4EventRd V0.71 from unit
10 LogDoneMsgWr V0.71 to unit
11 RemoteKbdWr TBD to unit
11 RemoteLCDRd TBD from unit
11 Reset V0.61 to unit
11 TimeDateQry V0.88 to unit
11 TimeDateRd V0.88 from unit
11 TimeDateWr V0.88 to unit
P300H
Instr' Body Partner
Code Length (optional)
28 0 RxCalcRd
6
26 RxCalcQry
29 0 TxCalcRd
6
30 TxCalcQry
8 0 (ack)
32 0 ContModeRd
6
2 ContModeQry
33 2 (ack)
6
0 0 ShortDeviceRd
6
6 ShortDeviceQry
37 0 UnitInfoRd
6
18 UnitInfoQry
51 14 (ack)
6
50 0 SAFStatRd
6
58 SAFStatQQry
43 4 (ack)
6
26 0 TxPwrRd
6
2 TxPwrQry
27 2 (ack)
6
34 1 Log16EventRd
6
178 Log16EventQry
35 1 Log4EventRd
6
46 Log4EventQry
36 2 (ack)
6
6 RemoteLCDRd
6
9
110 RemoteKbdWr
4 0 (ack)
10 0 TimeDateRd
6
6 TimeDateQry
11 6 (ack)
P300 Series Modem Installation and Operating Handbook
Query Calculated Rx parameters, eg intermediate data rates (ie with each overhead as
added), Min overhead frame lengths, ESC rates available (current config only)
Config
Query Calculated Tx parameters, eg intermediate data rates (ie with each overhead as
added), Min overhead frame lengths, ESC rates available (current config only).
Config
Command
Query Local / remote config parameters
Config
Change
Query The device model number & software version (two most significant digits only)
Status
Query The model number, version numbers & ID's of the internal cards & software
Status
Change Enter an unpgrade code, there is no direct corresponding read other than SAFStat
Query Query the hardware & software feature capability
Config
Action Front panel `actions`, eg buffer centre, clear slip counters, etc.
Query Short message for Tx power or carrier on/off without rest of Txmod. To allow
changes to Tx power without risk of anything else being reconfigured & hence
Config
traffic disturbed (current config only).
Change
Query log To read the traffic log.
Log events
Query log
Log events
End log query
Keyboard Remote operation of unit as if from keyboard. Initial RemoteKbdWr message with
either all no key presses or single `Main` keypress initiates first RemoteLCDRd.
Display
Command
Query The time & date of the internal real time clock. The timeDateWr will probably be
used in broadcast mode (address 0), and the TimeDateRd probably used on
Status
status screens to display the current unit time to compare log entries to etc.
Change
Function
Page 199