Table of Contents
Advertisement
3
DESCRIPTION
3.1
OPERATION
The P300 Series modem are fully software controlled and with the exception of the optional G.703 interface
option there are no links or switches used to configure the unit. This enables all control and configuration
to be performed either locally from the front panel, or by remote M&C. Local control is by front panel
keyboard, and a large, easy to read, 80 character LCD display, with clear, intuitive menus for configuration
and control. All the set-up parameters are stored in non-volatile memory which will retain data for a
minimum of 3 years, with no power applied. The receive and transmit functions of the Modem are
independent, so that they may be operated at a different data rates, IF frequencies, or different services if
required.
Like all Paradise Datacom products, the P300 Series includes a traffic log which stores the last 1000
events, suitably time-stamped. It can automatically add several measured parameters to the log at operator
set intervals, including average & worst case Eb/No, average & worst case estimated user BER, average
& worst case estimated uncorrected BER, and the buffer fill state. The logged performance monitoring
allows investigation into customer reports of poor link performance, and can provide a useful correlation
against weather conditions, etc.
3.2
FAULT PHILOSOPHY
Faults are split into two categories:
a)
UNIT FAULTS:
b)
TRAFFIC FAULTS:
A full description of every detected fault, its category (unit or traffic), and the corresponding action taken
is provided in Appendix G - Fault Messages and Action Table. The response of the front panel LED
indicators and external fault relays respond is described in the following sections.
3.3
ELECTRICAL DESCRIPTION
The P300 modem comprises of a single main modem Printed Circuit Board (PCB) with four optional
additional boards:
Optional G.703 interface (two different boards for T1 or E1 operation).
'
Optional IDR ESC board which provides for all the IDR ESC requirements
'
Optional Monitor / AGC board which provides a user scalable AGC output and a constellation
'
monitor point.
Optional Turbo FEC daughtercard
'
For the P310, an L-Band daughterboard is also fitted internally above the main modem board, and further
three internal options are possible:
Reference oscillator options (several of varying stabilities)
'
An internal 100W PSU to provide a DC feed to an external BUC
'
An optional FSK communications board, to enable a modem and BUC to bo operated from the
'
modem front panel (and to provide closed loop power control to the BUC flange).
P300H
Equipment failures (such as a synthesiser lock failure).
Data path failures, (such as a lack of input clock).
P300 Series Modem Installation and Operating Handbook
Page 16
- Quick Links:
- P300 Series Features
Hide quick links:
Advertisement
Table of Contents
