Advertisement
Line 6 : "TIMER ON "
Indicates that the on/off timer is running.
The following Complaints may be caused by the activation of the sleep timer:
The set may turn on from standby or may switch to a different channel without using either the remote control or
the local keyboard.
To switch off the activation timer:
Select "TIMER" in the "FEATURE" menu.
Select "ACTIVATE" in the "TIMER" menu.
Set to "OFF" with the left/right cursor keys.
Line 7 : "CHANNEL BLOCKED"
Indicates that all channels are locked except the selected channel.
The following complaints may be generated due to locked channels:
TV cannot be switched on from standby with the local keyboard buttons.
"CH+" and "CH-" buttons on local keyboard do not function.
To disable the LOCK feature:
Select "FEATURE" menu (with the Remote Control).
Select "LOCK" (with the Remote Control).
Set to "OFF"
Line 8 : "NOT PREFERRED"
Indicates that at least one channel is deleted as a preferred channel (by default, all channels are skipped).
Note that "SKIPPED" will always be displayed in CSM unless all the channels are not skipped.
To add a channel as a selected channel to the list of preferred channels:
Select "INSTALL" menu
Select "CHANNEL EDIT"
Select "ADD/DELETE"
Set to "ADD" with the left/right cursor keys
Line 9 : "HOTELMODE ON"
Indicates that the Hotel mode has been activated.
Line 10 : "SOURCE :"
Indicates which SOURCE is installed for this preset.
AV1, AV2, SVHS2, Channel number (8)
Line 11 : "SOUND"
Indicates which sound mode is installed for this preset.
Mono, Stereo, SAP, NICAM, L1, L2, Virtual or Digital
Line 12 : "VOLUME"
Value indicates level at CSM entry.
Line 13 : "BALANCE"
Value indicates level at CSM entry.
Advertisement
