Advertisement
Convergence Menu Flow Diagram
Use the Cursor Up-Down button to highlight the selection. Press the Cursor Right button to make the selection.
In the second menu, MANUAL CONVERGENCE WO VIDEO means that the screen behind the adjustment grid
will be blank. MANUAL CONVERGENCE W VIDEO displays the applied video behind the adjustment grid.
RESTORE FACTORY loads the values from the last saved convergence alignment. RESTORE DEFAULT
loads values from the ROM on the ACS Microprocessor. If the ACS module has been changed, there may not
be data in the NVM for RESTORE FACTORY. The RESTORE DEFAULT settings will then be loaded. Loading
default values will overwrite all of the Convergence modes.
A internally generated grid will be displayed in the Convergence mode as shown below. The shaded area is the
screen area. Horizontal lines A and M are displayed on the top and bottom edge of the visible screen area.
Lines 1 and 15 are also displayed on the left and right edge of the visible screen area. Vertical line 0 is
adjustable, but not visible.
Advertisement
