Open And Closed Modes - Radio Shack PRO-2067 Owner's Manual

OPEN AND CLOSED MODES

When set to the open mode, the scanner only uses the ID list to look up ID text tags
and stops on any ID code.
When set to the closed mode, the scanner stops only on sig-
nals that have an ID code which is found in the ID list for the
bank.
Note: When you select a channel manually, any transmis-
sion opens squelch, regardless of the current mode.
The open or closed mode is set in each channel storage bank.
der the channel storage bank's number while scanning. Or, the status display
shows the OPEN/CLOSED
mode or while the scanner is receiving a signal during scanning.
When no ID code is programmed into the scanner, it receives the signal in PL,
DPL, LTR, MOT, or ED mode.
Mode
PL and DPL
MOT/ED/LTR
Changing the Open/Closed Mode
1. Press .
MAN
2. Press
FUNC
3. Press
FUNC
After that message disappears, the 10th right most digit at the top of the line of
the display changes from
4. Repeat Steps 2–3 for each bank.
mode at the top line while the scanner is in manual
Open
Accepts any PL and DPL.
Stops on any transmission. If the
ID is stored, displays the text tag,
otherwise displays the talk group
ID.
then or to select the channel-storage bank.
then .
Bank OPEN
2
to – or vice versa.
+
Accepts only the PL or DPL stored
in the channel.
Only stops on transmission if the
ID is stored. Displays the text tag.
or
Bank CLOSED
Closed Mode
+ or – appears un-
Closed
appears.
43