Menu Items - Samsung HG46NA578LBXZA Installation Manual

Menu Items

¦
To Enter this menu: Press the
To Exit from this menu : AC Power off, and then turn on again. Any changes you made are saved.
Menu Item
Hospitality Hospitality
Mode
Mode
SI Vendor SI Vendor
Power On
Channel EN
Power On
Channel
Channel Type
Power On
Volume EN
Power On
Power On
Volume
Min Volume
Max Volume
Panel Button
Lock
Power On
Source
Power On
Option
Channel
Setup
Channel
Editor
Channel
Dynamic SI
18
English
[HG470570_HOTEL-ZA]ENG.indd 18
MUTE → 1 → 1 → 9 → ENTER
initial Value
Select the Hospitality mode.
Standalone y Standalone
y Interactive
Available in the Interactive menu only.
Select the SI Vendor.
Samsung
y Samsung / OCC / MTI / Nstreams / NXTV / Enseo / Cardinal /Guestek /
SeaChange / EBL
Set the default values, which will be applied when the TV is turned on.
y User Defined : Refers to the settings configured for Power On Channel,
Last Saved
Channel Type.
y Last Saved : Refers to the last saved settings.
When the TV is turned on, it switches automatically to this channel when in
3
Stand Alone Hospitality mode.
Channel search CABLE and AIR.
... y ATD, DTV : ON-AIR
y CATV (Cable Analog TV), CDTV (Cable Digital TV) : CABLE TV
Set the default volume values which will be applied when the TV is turned on.
Last Saved y User Defined : Uses the settings configured for Power On Volume.
y Last Saved : Uses the last saved settings.
... TV will switch on at this Volume Level in Stand Alone Hospitality mode.
0 Minimum Volume Level user can set in Stand Alone Hospitality mode.
100 Maximum Volume Level user can set in Stand Alone Hospitality mode.
Front panel (Local key) operation on/off.
y Unlock : Unlock all panel keys
Unlock y Lock : Lock all panel keys
y Power : Lock all panel buttons except Power
y Menu/Source : Lock Menu and Source
TV Select the input source the TV displays when it is turned on.
Determines the TV's state when power returns after a power failure or after you
have unplugged the TV and then plugged it in again.
Last Option
- LAST OPT: Returns to its last Power state. If it was in Stand-by, it returns to
Stand-by. If it was on, it turns on.
You can use the Channel menu option in the OSD.
Edit Channel Number and Name.
y On : Check the DTV Program channel number. (DTV channel editor is
inaccessible)
ON
y Off : No check of the DTV Program channel number. (DTV channel editor
is accessible, but additional channel program number update is not
supported)
buttons in order.
Description
2012-04-17 8:41:05