The Control Panel - Samsung HG46NA578LBXZA Installation Manual

✎
The color and shape of the TV Controller may vary depending on the model.
✎
The TV's Controller, a small joy stick like button on the bottom right side of the TV, lets you control the TV without the
remote control.
Power on
Adjusting the volume
Selecting a channel
Using the Function menu
Selecting the MENU (m)
Selecting Contents Home
( )
Selecting a Source (s)
Power Off (P)
✎
To close the Menu, Contents Home, or Source, press the Controller for more than 1 second.
Standby mode
Your TV enters Standby mode when you turn it off, and continues to consume a small amount of electric power. To be safe
and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on
vacation, for example). It is best to unplug the power cord.
8
English
[HG470570_HOTEL-ZA]ENG.indd 8
Using the TV's Controller
CONTENT
Remote control sensor
Turn the TV on by pressing the Controller when the TV is in standby mode.
Adjust the volume by moving the Controller from side to side when the
power is on.
Select a channel by moving the Controller backwards and forwards when
the power is on.
To view and use the Function menu, press and release the Controller
when the power is on. To close the Function menu, press and release the
Controller again.
With the Function menu visible, select the MENU (m) by moving the
Controller to the left. The OSD (On Screen Display) Menu appears. Select an
option by moving the Controller to the right. Move the Controller to the right
or left, or backwards and forwards to make additional selections. To change
a parameter, select the it, and then press the Controller.
With the Function menu visible, select Contents Home (
moving the Controller backwards. The Contents Home main screen
appears. Select an application by moving the Controller, and then pressing
the Controller.
With the Function menu visible, open the Source(s) screen by pushing
the Controller to the right. The Source screen appears. To select a
source, move the Controller back and forth. When the source you want is
highlighted, press the Controller.
With the Function menu visible, select Power Off (P) by pulling the
Controller forwards, and then press the Controller.
Function menu
Down (Front)
Left
TV Controller
Up (Rear)
Right
) by
2012-04-17 8:40:59