Selecting The Automatic Operating Mode - Samsung AP500F Owner's Instructions & Installation Manual

Selecting the Automatic Operating Mode

10
E-
You can start the air conditioner in AUTO mode.
1 If necessary, press the ON/OFF(
Result: The power indicator on the control panel comes on.
The indoor unit beeps twice.
The operation mode previously set is displayed.
The air conditioner starts up in the mode selected
when the unit was last used.
IMPORTANT
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
Switched on
Stopped
It will start up normally after a three-minute rest period.
2
If the AUTO COOL indicator is not displayed, press MODE button one
or more times until it appears.
Result: The indoor unit beeps each time you press MODE.
The air conditioner starts up in AUTO mode.
To operate the unit by remote control, press the AUTO COOL button.
N N N N o o o o t t t t e e e e In AUTO mode, the optimum fan speed is selected automatically
and cannot be changed.
You can change modes at any time.
3 To control the air flow direction when necessary, refer to page 14.
) button.