Operation With Dvd And Video Cd; Playing Dvd And Video Cd; General Features; Moving To Another Title - Sanyo HV-DX1E Instruction Manual

Operation with DVD and Video CD

Playing DVD and Video CD

Playback Setup
Turn on the TV and select the video input source con-
nected to the DVD+VCR.
Audio system: Turn on the audio system
and select the input source connected to the
DVD+VCR.
Press OPEN/CLOSE (Z Z ) to open the disc tray.
1 1
Load your chosen disc in the tray, with the label
2 2
facing up.
When a double-sided DVD is inserted, make sure
the side you want to play is facing up.
Press OPEN/CLOSE (Z Z ) to close the tray.
3 3
READING appears on the TV screen, and playback
starts automatically. If playback does not start,
press PLAY (H).
In some cases, the disc menu might appear
instead.
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD or Video CD which contains a menu.
DVD
Use the 1 1 /2 2 /3 3 /4 4 to select the title/chapter you want to
view, then press SELECT/OK to start playback.
Press TITLE or DISC MENU to return to the menu
screen.
VCD2.0
Use the numerical buttons to select the track you
want to view.
Press RETURN to return to the menu screen.
Menu settings and the exact operating procedures for
using the menu may differ depending on the disc.
Follow the instructions on each menu screen.
You also may set PBC to Off under setup. See page
19.
Notes
– If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see
"Parental Control", on page 20).
– DVDs may have a region code.
– Your player will not play discs that have a region code
different from your player. The region code for this
player is 2 (two).
26
VCD2.0 VCD1.1
DVD

General Features

Note
Unless stated otherwise, all operations described use
the remote control. Some features may also be avail-
able on the Setup menu.

Moving to another TITLE

When a disc has more than one title, you can move to
another title as follows:
Press DISPLAY when playback is stopped, then
press the appropriate numerical buttons (0-9) to
select a title number.

Moving to another CHAPTER/TRACK

1/12
DVD VCD1.1
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to another
chapter/track as follows:
Press BACKWARD (.) or FORWARD (>)
briefly during playback to select the next chapter/track
or to return to the beginning of the current
chapter/track.
Press BACKWARD (.) twice briefly to step back to
the previous chapter/track.
To go directly to any chapter during DVD playback,
press DISPLAY. Then, press 3 3 /4 4 to select C
(chapter) (or for a Video CD, select T for track). Then,
enter the chapter/track number using the numerical
buttons (0-9).
Note
For two-digit numbers, press the buttons in rapid
succession.

Slow Motion

DVD
1 Press PAUSE/STEP (X) during playback.
The DVD+VCR will now go into PAUSE mode.
2 Press BACKWARD (.) or FORWARD (>)
during pause mode.
The DVD+VCR will enter SLOW mode.
3 Use BACKWARD (.) or FORWARD (>) to
select the required speed: t 1/16, t 1/8, t 1/4 or
t 1/2 (backward), or T 1/16, T 1/8, T 1/4 or T
1/2 (forward).
4 To return to playback, press PLAY (H).
Note
Slow motion playback in reverse is not applicable for
Video CD.
1/3
DVD
1/3
VCD2.0 VCD1.1