Siemens SIMATIC Box PC 620 Operating Manual page 6

Welcome to your SIMATIC Box PC 620
Range of Application
The SIMATIC Box PC 620 is a basic device for high performance automation
solutions. It meets the highest requirements through:
• compliance with the requirements for a fire enclosure to UL1950/EN60950
(device with AC power supply), i.e. it may be used without an additional fire
enclosure;
• extremely compact dimensions;
• suitability for continuous 24 hour operation;
• serviceability in a wide ambient temperature range;
• high robustness;
• a design which is easy to service and maintain.
Fitting Option
The SIMATIC Box PC 620 can be installed in all the usual positions.
There are anchorage points on both of the long sides for securing the unit.
Mounting brackets can be screwed on to these anchorage points.
Functions
The SIMATIC Box PC 620 is equipped with software that allows it to be used
universally. The following software packages are available:
• Operating system Windows NT;
or
• Operating system Windows 2000
or
• Operating system Windows 98
Due to its hardware, the SIMATIC Box PC 620 additionally allows the use of:
• SIMATIC supplementary software
• Software from the entire world of automation
• Software from the PC world
Further Areas of Application:
The SIMATIC Box PC 620 can also be used in other areas of automation
(SIMATIC HMI, SIMATIC NET, TELEPERM-M, SINUMERIK / SIMODRIVE, etc.).
vi
SIMATIC Box PC 620 Operating Manual
C79000-Z7076-C638-04