Siemens SIMATIC Box PC 620 Operating Manual page 32

Hardware Components of the SIMATIC Box PC 620
Connecting USB Devices
You can connect peripheral devices with USB interfaces to the USB port.
• Plug the USB cable into the port
The device connected in this way is available as soon as it has been registered
by the Plug and Play operating system (e.g. Windows 98).
A USB keyboard can be used to manipulate the Bios setup.
Figure 3-3 Connection of USB Devices
Note
Operating systems which do not support Plug and Play (e.g. Windows NT 4.0), do
not in general allow the operation of USB devices.
3-6
USB port
SIMATIC Box PC 620 Operating Manual
C79000-Z7076-C638-04