Table of Contents
Advertisement
Chapter 3
Setting Properties of the VSAM eWay
Table 8 VSAM non-Transactional eWay—JDBC Connector Settings (Continued)
Name
DriverProperties
The Connection Pool DataSource
implementation may need to execute
additional methods to assure a
successful run. The additional
methods will need to be identified in
the Driver Properties. You must
ensure that the driver is installed on
both the Logical Host machine and
the Enterprise Designer machine.
Delimiter
This is the delimiter character to be
used in the DriverProperties prompt.
VSAM eWay Adapter User's Guide
Description
31
eWay Environment Properties
Required Value
The delimiter set by the user. For more
information, see the Delimiter
property below.
Valid delimiters are:
"<method-name-1>#<param-
1>#<param-2>#.........<param-
n>##<method-name-2>#<param-
1>#<param-2>#........<param-
n>##......##".
For example: to execute the method
setSpyAttributes, give the method a
String for the URL
"setSpyAttribute#<url>##".
The setSpyAttributes (for
Note:
Data Direct drivers) that are
contained in the following
examples (between the last set
of double octothorps [##]
within each example), are used
for debugging purposes and
need not be used on every
occasion.
Optional—if you are using Spy Log:
"setURL#jdbc:Seebeyond:VSAM://
<server>:4100;DatabaseName=<datab
ase>##setSpyAttributes#log=(file)c:/
temp/spy.log;logTName=yes##"
The default is #. See the
DriverProperties property above for
more information on how the default
value is used.
Sun Microsystems, Inc.
Section 3.5
Advertisement
Table of Contents
