Enter Programmable Delay Value; Enter Oscillator Control Range (Not Implemented) - Symmetricom 5402 Operating Manual

Operating Manual
Operation
Description:
The input 1 PPS can be sliced at two deferent levels. This command selects which slicing
level is used. x=0 - High 5 volt input threshold, x=1 - Low 2.5 volt input threshold.
Response Format:

Enter Programmable Delay Value

Command Format:
Description:
The yyy is a number from 000 to 255. The number is the delay value sent to a programmable
delay. The programmable delay moves the 1 PPS outputs and allows them to be aligned to
the 10 MHz.
Response Format:

Enter Oscillator Control Range (not implemented)

Command Format:
Description:
PN 8500-0150, Rev. A, May 2005 22