Enter Start-Up Parameters; Request Start-Up Parameters - Symmetricom 5402 Operating Manual

Operating Manual
Operation
r - Revision Letter of Firmware.
Response Format:

Enter Start-up Parameters

Command Format:
Description:
n - Start-up Index; n (1 to 6) selects which one of 6 elements in the start-up table that will be
modified.
gg.g - Dynamic Gain Value; gg.g (0 to 99.9) represents the dynamic gain value that will be
used during start-up for element "n".
tttttt - End Time; tttttt is the end time of element "n" (based on Rubidium lock). The next
element in the start-up table will be used after this time.
Response Format:

Request Start-up Parameters

Command Format:
Description:
n - Start-up Index; n (1 to 6) selects which one of 6 elements in the start-up table that will be
reported.
PN 8500-0150, Rev. A, May 2005 17