Setting The Av Input Mode - Toshiba 39L2300U User Manual

The list of channels appears.
(Sample Illustration) Channel Options
2
Press the
skipped, and then press the ENTER button .
A check will appear in the box. To remove the check, press the
ENTER button again.
To add a channel to the channel memory:
Highlight the checked box next to the channel number you
v
wish to add, and then press the ENTER button to remove the
check.
To manually add digital sub-channels on a physical channel:
Use the Channel Numbers and the (Dash 100) on the remote
v
control to enter the channel number (for example, 56–1).
If the channel is found, the number will be added to the list and
the box will be unchecked. If the channel is not found, a
message appears.

Setting the AV input mode

This setting determines the configuration of the shared AV input on
your TV. You can set this input for either ColorStream HD or Video.
Add the following descriptions:
To set the AV Input mode:
/ (arrow) buttons to select a channel position to be
You can also block specific channels so that they cannot be tuned
until you unlock them. For information, see
page 87.
Skipped channels cannot be selected with the CH
buttons; however, they can be accessed using the number keys on the
remote control.
Setting up your TV
Setting the AV input mode
"Locking channels" on
55
/ (arrow)