Problem Solving - Toshiba e-STUDIO190F Operator's Manual

For Tray-1
Load Paper : Printing Side Down
Paper Weight
1-Sided Copy : 16 – 28 lb
2-Sided Copy : 20 – 24 lb
Paper Capacity : 250 Sheets (20 lb)
For Tray-2
Load Paper : Printing Side Down
Paper Weight
1-Sided Copy : 16 – 28 lb
2-Sided Copy : 20 – 24 lb
Paper Capacity : 550 Sheets (20 lb)

Problem Solving

NOTE:
1) Feeding paper into the Sheet Bypass at the
same time when the copying/printing has started
and paper is feeding from either Tray 1 or Tray 2,
will show "REMOVE MISFED PAPER J00"
message on the LCD display. When this occurs,
remove the paper from the Sheet Bypass to reset
the jam indication then resume copying/printing.
2) Do not leave a paper in the Sheet Bypass as
paper jam indication may display.
3
Paper Tray-1
Paper Tray-2
Adding Paper
Replacing Toner Cartridge
Removing a Misfed Paper
U## (User Error Code)
J## (Jam Error Code)
E## (Machine Error Code)
(Call your service representative)
Maximum Copies Limitation
Firmly close the Paper Tray.
NOTE:
1. To prevent paper jams or other
problems, adjust the paper guides
(Length & Width) when adding paper
into the tray.
2. When changing the paper size, See
page 122.
3. Make sure that the paper is set
properly and that it does not exceed
the Tray-1/Tray-2 Max. Level
Indicator.
(See page 30)
(See page 32)
(See page 34)
(See page 34)
(See page 35)
29