Specifications - Tripp Lite SmartPro SMX3000XLRT2U Features And Specifications

PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, email notification,
event logging and running user-defined script commands.
Offers simultaneous monitoring through included USB and DB9 interface ports, or the monitoring by any number of additional servers over
IP with included PowerAlert monitoring software.
Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage,
DC battery voltage and remaining battery capacity
Emergency Power Off (EPO) interface with cable
Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for delayed or immediate reboot
of connected devices
Supports Tripp Lite's WatchDog software application to restore operation to locked equipment through soft reboot of application, OS or hard
power off/on reboot of connected equipment - ideal for unattended kiosk applications (requires optional WATCHDOGSW)
Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter
Emergency Power Off (EPO) interface with cable
Multi-function audible alarms and set of 5 front panel LEDs
Network-grade AC surge suppression
Attractive all-black color scheme
UPS battery set ships fully assembled, no time consuming connection of internal batteries by user is necessary

Specifications

OUTPUT
Output Volt Amp Capacity
(VA)
Output kVA capacity (kVA)
Output Watt Capacity
(watts)
Output kW capacity
Output power factor
Nominal Output Voltage(s)
Supported
Nominal Voltage details
Frequency compatibility
Output voltage regulation
(line mode)
Output voltage regulation
(Battery mode)
Built-in UPS output
receptacles
Included output power
cables
Built-in controllable
switched load banks
Output circuit breaker
Output AC waveform (AC
mode)
Output AC waveform
(battery mode)
INPUT
3000
3
2250
2.2
0.8
230V
230v nominal inverter output voltage
50 / 60 Hz
230V (-15%, +6% )
+/- 5%
8 C13 outlet(s); 1 C19 outlet(s)
Includes 3 C13 to C14 output power cables
Three switchable two-outlet C13 load banks
10A (x2) - each breaker protects 4 C13 outlets, C19 outlet does not include a breaker
Sine wave
Pure Sine wave