Table of Contents
Advertisement
Owner's Manual
SmartPro
Intelligent, Line-Interactive UPS Systems
• SMX500RT1U • SMX750RT1U • SMX1500XLRT2U • SMX3000XLRT2U
• 230V Sine-Wave Input/Output • 500VA - 3000VA Capacities
Français
Russian
Copyright ©2004 Tripp Lite. All rights reserved. SmartPro
®
• Extended-Run Options*
* SMX1500XLRT2U and SMX3000XLRT2U models
1111 W. 35th Street Chicago, IL 60609 USA
Customer Support: (773) 869-1234 • www.tripplite.com
Rackmount
®
is a registered trademark of Tripp Lite.
2
3
5
6
7
11
12
12
13
25
37
Advertisement
Table of Contents
Related Manuals for Tripp Lite SmartPro AGSM152DRTi2U
Summary of Contents for Tripp Lite SmartPro AGSM152DRTi2U
-
Page 1: Table Of Contents
Storage and Service Battery Replacement Specifications Español Français Russian Customer Support: (773) 869-1234 • www.tripplite.com Copyright ©2004 Tripp Lite. All rights reserved. SmartPro Rackmount ® • Extended-Run Options* * SMX1500XLRT2U and SMX3000XLRT2U models 1111 W. 35th Street Chicago, IL 60609 USA ®... -
Page 2: Important Safety Instructions
SAVE THESE INSTRUCTIONS This manual contains important instructions that should be followed during the installation, operation and storage of all Tripp Lite UPS Systems. Failure to heed these warnings will void your warranty. UPS Location Warnings • Use caution when lifting your UPS. Because of the considerable weight of all rackmount UPS systems, at least two people should assist in lifting and installing them. -
Page 3: Mounting
Mounting (Rack) Mount your equipment in either a 4-post or 2-post rack or rack enclosure (see next page for 2-post mounting). The user must determine the fitness of hardware and procedures before mounting. If hardware and procedures are not suitable for your application, contact the manufacturer of your rack or rack enclosure. - Page 4 Mount 1U UPS models in 2-post racks with user-supplied hardware following the procedure below. If you mount 2U UPS models in 2-post racks, they require the addition of a Tripp Lite 2-Post Rackmount Installation Kit (model: 2POSTRMKIT, sold separately). See Installation Kit owner’s manual for installation procedure for 2U UPS models.
-
Page 5: Quick Installation
UPS. Note: Additional interconnection cords (C13 to C14) are available from Tripp Lite. Call 773-869-1234 (Part # P004-006). * Your UPS is designed to support only computer equipment. You will overload the UPS if the total VA ratings for all the equipment you connect exceeds the UPS's Output Capacity (see Specifications). -
Page 6: Optional Installation
(see ) to connect the communication port on your computer to the communication port of your UPS. Install on your computer the Tripp Lite PowerAlert Software appropriate to your computer’s operating system. Your UPS may feature additional communications ports; these ports may also be connected to additional computers which have PowerAlert Software installed. -
Page 7: Basic Operation
UPS batteries need to be recharged or replaced. Allow the UPS to recharge continuously for 12 hours, and repeat the self-test. If the LED remains lit, contact Tripp Lite for service. If your UPS requires battery replacement, visit www.tripplite.com/support/battery/index.cfm to locate the spe- cific Tripp Lite replacement battery for your UPS. -
Page 8: Indicator Lights (Front Panel)
UPS batteries need to be recharged or replaced. Allow the UPS to recharge continuously for 12 hours, and repeat the self-test. If the LED continues to light, contact Tripp Lite for service. If your UPS requires battery replacement, visit www.tripplite.com/support/battery/index.cfm to locate the spe-... -
Page 9: Ups Features (Rear Panel)
USB connection to your UPS, you can remotely reboot connected equipment by IEC320-C13/230V turning the receptacles OFF and ON using Tripp Lite's PowerAlert Software. Select models have their receptacles divided into one or more load banks (labelled “LOAD 1,” etc.) which may be remotely switched OFF and ON using Tripp Lite UPS software without interrupting power to equipment connected to the other outlets. - Page 10 External Battery Connector (Select Models Only): Use to connect Tripp Lite external battery packs for additional runtime. The specifications section of this manual lists the Tripp Lite external battery packs that are compatible with your model. Refer to instructions available with the battery pack for complete con- nection information and safety warnings.
-
Page 11: Storage And Service
2. If the problem continues, do not contact or return the UPS to the dealer. Instead, call Tripp Lite at (773) 869-1233. A service technician will ask for the UPS's model number, serial number and purchase date and will attempt to correct the problem over the phone. -
Page 12: Battery Replacement
ALL MODELS: Voltage-Regulated Output Voltage Range (230V +/- 9%); On Battery Output Voltage Range (230V +/- 5%); AC Surge Suppression (exceeds IEEE 587 Cat. A & B standards); AC Noise Attenuation (>40 dB); AC Protection Modes (H to N). The policy of Tripp Lite is one of continuous improvement. Specifications are subject to change without notice. Note on Labeling Two symbols are used on the label. -
Page 13: Español
1111 W. 35th Street, Chicago, IL 60609 USA 773.869.1234 (USA) • 773.869.1212 (International) www.tripplite.com 200309053 93-2186_EN...