Whirlpool W10407342A1 User Manual page 5

Changing the Water Filter
A. Water filter cover door
1. Locate the water filter cover door in the base grille, and pull open
the filter door. The filter will be released and then be ejected as the
door is opened.
2. When the door is
completely open,
pull the filter
straight out.
NOTE: There may
be some water in
the filter. Some
spilling may occur.
Use a towel to
wipe up any spills.
The following accessories are available for your refrigerator. To order an
accessory, call 1-800-442-9991 and ask for the part number listed or
contact your authorized Whirlpool dealer. In Canada, call
1-800-807-6777.
affresh™ Stainless Steel Cleaner:
Order Part #W10355016
In Canada, order Part #W10355016B
A
ACCESSORIES
3. Take the new filter out of its packaging and remove the covers from
the O-rings. Be sure the O-rings are still in place after the covers
are removed.
4. With the arrow pointing to the left (toward the filter cover door's
hinge), align the new filter with the filter housing and slide it into
place. The filter cover door will automatically begin to close as the
new filter is inserted.
5. Close the filter cover door completely in order to snap the filter into
place. You may need to press hard.
6. Flush the water system. See "Water and Ice Dispensers."
affresh™ Stainless Steel Wipes:
Order Part #W10355049
In Canada, order Part #W10355049B
affresh™ Kitchen & Appliance Cleaner:
Order Part #W10355010
In Canada, order Part #W10355010B
Water Filter:
Order Part #W10295370 (P4RFWB)
5