Advertisement
r VS-19TS Swift manual op.qxd
Putting your vacuum cleaner together
10
Using the handle attach the main
hose into the left hand side of the
cleaner. Press down firmly to
secure in place. The main hose can
then be secured in the top and side
of the tool holder.
Operating the vacuum cleaner
1
Plug the cord into an electrical
outlet and turn on by pressing the
on/off pedal, located on the back
left of the cleaner.
7/15/04
8:00 PM
Page 3
Push the canister lid firmly on top of
the dust canister and place it onto
the cleaner. The canister lid will
snap into place in the body of the
cleaner.
Cleaning carpets or hard flooring
To unlock the handle from the
upright position press the handle
release pedal down.
11
Attach the tools to the tool holder.
The 2 in 1 tool fits over a post at
the back of the vacuum cleaner.
The crevice tool fits into a round
slot on the rear right hand side of
the tool holder. The extension wand
hose on the left hand side.
2
Move the handle to the desired
position (A) for storage and position
(B) for normal operation.
To clean under furniture, press
the release pedal again and use
position (C).
12
3
Advertisement
