Advertisement
r VS-19TS Swift manual op.qxd
Putting your vacuum cleaner together
4
Align the holes in the tool holder,
with the holes on top of the body.
Putting your vacuum cleaner together
7
Push down firmly and line up the
screw hole on the rear of the handle.
7/15/04
7:59 PM
Page 2
Use two of the screws supplied to
secure the tool holder in place.
Do not over tighten.
Use one of the screws supplied to
secure the handle on the body.
5
With the hose clip on the handle
facing you place it onto the top of
the body of the cleaner.
8
Insert the small end of the main
hose into the tool holder on the
right hand side.
6
9
Advertisement
