Troubleshooting - Vax V-028 Instruction Manual

Upright carpet washer
Hide thumbs Also See for V-028:
Table of Contents

Advertisement

Vax V-028 Range.qxd
Storage/Troubleshooting
10. Storage
Transporting & storing carpet washer
Fig.10/1
Fig.9/1 Put handle in upright locked position.
Turn unit off. Store cord and above floor cleaning
attachments if used.
Fig.9/2 Tilt unit back on rear wheels and push
forward.
NOTE: The unit can also be transported between
rooms or floors using the carry handle.
BEFORE STORING CARPET WASHER:
1. Empty and rinse clean water tank and dirty
water tank.
2. Replace empty clean water tank and dirty water
tank.
3. Ensure that brushes and underside of unit are fully
dry
prior
to
storing
wood surface.
NOTE: Do not store unit with a full clean water tank or
dirty water tank.
DO NOT TRANSPORT THE CARPET WASHER
WITH EITHER THE CLEAN WATER TANK OR
DIRTY WATER TANK FULL.
12
27/4/07
13:26
Page 12
Fig.9/2
on
a
carpeted
or

11. Troubleshooting

WARNING: TO REDUCE RISK OF PERSONAL
INJURY, UNPLUG CARPET WASHER BEFORE
SERVICING
PROBLEM: Carpet washer won't pick-
up or low suction
Cause: The dirty water tank door is not installed.
Solution: Insert the dirty water tank door.
Cause: The dirty water tank door is not installed
correctly.
Solution: Review placing dirty water tank in base of
carpet washer.
Cause: The dirty water tank is full.
Solution: Empty the dirty water tank.
Cause: The dirty water passage clogged.
Solution: Clean the dirty water tank.
PROBLEM: Water escaping from carpet
washer
Cause: The dirty water tank is full.
Solution: Empty the dirty water tank.
Cause: The dirty water tank is not installed correctly.
Solution: Review placing dirty water tank in base of
cleaner.
Cause: The clean water tank is not installed properly.
Solution: Review clean water tank installation.
PROBLEM: Carpet washer won't
dispense solution
Cause: The clean water tank is not installed properly.
Solution: Review How to Operate.
Cause: The carpet washer needs a service.
Solution: Take it to service center or contact Vax
Careline.
PROBLEM: Carpet washer attachments
won't pick up
(Vax Model V-028 only)
Cause: The hose is clogged.
Solution: Remove the hose and tools; remove
obstruction.
Cause: The dirty water tank is full.
Solution: Empty the dirty water tank.
PROBLEM: Carpet washer attachments
won't spray
(Vax Model V-028 only)
Cause: The solution tube is not connected properly.
Solution: Connect the solution tube properly.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents