Vauxhall Combo Infotainment Manual page 47

46 Voice recognition
3. Say "GPRS code".
The GPRS code is shown on the
display.
4. Say "Preset" to keep the existing
code.
or
Say "Disable" to disable the
GPRS code.
or
Press s and say "Cancel" to
cancel the voice interaction.
To exit the Settings menu:
■ Press s say "Exit".
Helpful hints for voice
commands
■ The vehicle's microphone is
intended for use by the driver. The
microphone is correctly positioned
and directed for this purpose, so
that you do not need to alter your
normal driving position for your
voice commands to be recognised
by the system.
If you speak too far from the
vehicle's microphone, e.g., if you
are sitting in the rear seats, the
system may not recognise your
voice command.
■ Background noise and loud
external noises can also cause
voice commands to be
misunderstood. It may be
necessary to close all windows and
sunroof, switch off the air
conditioning and request that
passengers do not speak whilst you
deliver your voice command.
■ After activating the Voice
recognition system, always wait for
the audible signal before speaking,
otherwise the system will only
register part of the voice command
and will not recognise it.
■ If the system does not recognise
the voice command, a message
asks you to repeat it. If the voice
command is still not recognised,
the list of recorded voice
commands is played back. Repeat
the desired voice command when it
is played back.
In the event the system still does
not recognise the voice command,
the Voice recognition system is
automatically deactivated.
■ If no voice command is given within
a few seconds of activating Voice
recognition, the system will
automatically deactivate.
Important notes on language
support
■ Voice commands are programmed
to be recognised by the system in a
particular language. However, the
system does not need to identify a
unique voice, therefore voice
commands can be recognised
regardless of the person speaking.
■ The system is able to recognise
voice commands in different
languages, but will only recognise
voice commands based on the
language currently set.
■ The following languages are
available for the Voice recognition
system:
English, German, French, Italian,
Spanish, Portuguese, Dutch,
Polish, Brazilian.