Menu Items - Vauxhall Combo Infotainment Manual

12 Introduction
Usage
Control operations for CD 50
The CD 50 Infotainment system is
equipped with Radio and CD player
functions and various adjustable
radio and audio settings.
The Infotainment system is controlled
via a rotary knob, function buttons,
and the menus shown on the display.
Switch on / switch off
Press the ON/OFF rotary knob to
switch the Infotainment system on.
The previously used audio source is
activated.
Press and hold ON/OFF rotary knob
to switch off.
Automatic switch-off
If the Infotainment system is switched
on while the ignition is off, it will switch
off automatically after some time, to
avoid discharging the vehicle battery.
Volume
Rotate the ON/OFF rotary knob to
adjust the volume.
The current setting is shown on the
display.
Maximum start-up volume
When the Infotainment system is
switched on, the last selected volume
is set by default, providing that
volume was lower than the fixed
maximum start-up volume.
Automatic volume adjustment
If the volume is adjusted during a
traffic announcement, the new setting
only remains during the
announcement and automatically
returns to the previous volume
setting.
Mute / pause
Press the ON/OFF rotary knob to
mute the Radio or pause the CD
player. Mute or Pause is shown on the
display.
To unmute/unpause, press ON/OFF
again.
Notice
Adjusting the volume automatically
cancels the mute/pause function.
Menus on the display screen
Access and navigate menus on the
display and adjust values using the
function buttons on the Infotainment
system:
■ Press AUDIO repeatedly to access
the Audio settings menu items
3 16.
■ Press MENU repeatedly to access
the Advanced functions menu
items 3 25.
■ Press _ or 6 to adjust values in

menu items.

Changes are saved and menus are
exited automatically after a brief
period.
Modes of operation
Radio
Operate the Radio using the function
buttons:
■ Press SRC to change the audio
source to radio.
■ Press BAND repeatedly to switch
waveband selection (FM1, FM2,
FMT Autostore, AM).