Vauxhall Combo Infotainment Manual page 46

To transfer contacts from the phone
to the Handsfree system:
If contacts were not copied to the
Handsfree system during the pairing
procedure, it is possible to transfer
contacts at a later date.
1. Press s and say "Settings".
2. Say "User data".
3. Say "Add contacts".
To remove all mobile phones,
contacts and data:
1. Press s and say "Settings".
2. Say "User data".
3. Say "Delete all".
4. A system message will ask you to
confirm your choice.
Say "Yes" to confirm or
say "No" to cancel the operation.
To pair a mobile phone to the
Handsfree system:
To use the Handsfree phone system,
the mobile phone must first be paired
to the vehicle via Bluetooth 3 50.
To activate the phone pairing
procedure using voice commands:
1. Press s and say "Settings".
2. Say "Pairing".
3. The PIN number is shown on the
vehicle display. Enter the PIN
number on your mobile phone
keypad.
Connecting is shown in the
display.
Notice
If the PIN number is not entered
within a few minutes, the operation
is automatically cancelled.
4. When pairing is complete, the
system will ask if you want to copy
the mobile phone contacts to the
Handsfree system.
Say "Yes" to confirm or say "No" if
you do not wish to copy the
contacts.
Voice recognition
Caution
Pairing a mobile phone should
only be carried out while the
vehicle is stationary.
Refer to Bluetooth connection section
for further information 3 50.
To access the Advanced features:
The Handsfree system identification
code and GPRS code for mobile
phones can be accessed via the
advanced features menu.
To access the Handsfree system
identification code:
1. Press s and say "Settings".
2. Say "Advanced features".
3. Say "System code".
The 8-digit identification code is
shown on the display.
To access the GPRS code:
1. Press s and say "Settings".
2. Say "Advanced features".
45